Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
OpenWrt for new hardware
#26
sorry I've gotten distracted with a few other projects over the last bit. The LAN/WAN on the M1214N units is just a port swap (WAN is LAN and LAN is WAN in factory default configuration.) 

As for wireless looks like this is the error in the log..


Fri Feb 14 00:05:28 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Fri Feb 14 00:05:28 2020 kern.info kernel: [  31.727622] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Fri Feb 14 00:05:28 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Fri Feb 14 00:05:28 2020 daemon.warn hostapd: wlan0: IEEE 802.11 Configured channel (22) not found from the channel list of current mode (1) IEEE 802.11g
Fri Feb 14 00:05:28 2020 daemon.warn hostapd: wlan0: IEEE 802.11 Hardware does not support configured channel
Fri Feb 14 00:05:28 2020 daemon.err hostapd: Could not select hw_mode and channel. (-3)
Fri Feb 14 00:05:28 2020 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->DISABLED
Fri Feb 14 00:05:28 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Fri Feb 14 00:05:28 2020 daemon.err hostapd: wlan0: Unable to setup interface.
Fri Feb 14 00:05:29 2020 daemon.notice hostapd: wlan0: interface state DISABLED->DISABLED
Fri Feb 14 00:05:29 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Fri Feb 14 00:05:29 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Fri Feb 14 00:05:29 2020 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started
Fri Feb 14 00:05:29 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Fri Feb 14 00:05:29 2020 daemon.notice netifd: radio0 (1270): cat: can't open '/var/run/wifi-phy0.pid': No such file or directory
Fri Feb 14 00:05:29 2020 daemon.notice netifd: radio0 (1270): WARNING (wireless_add_process): executable path /usr/sbin/hostapd does not match process  path (/proc/exe)
Fri Feb 14 00:05:29 2020 daemon.notice netifd: radio0 (1270): Command failed: Invalid argument
Fri Feb 14 00:05:29 2020 daemon.notice netifd: radio0 (1270): Device setup failed: HOSTAPD_START_FAILED
Reply


Messages In This Thread
OpenWrt for new hardware - by lonnie - 01-06-2020, 04:39 PM
RE: OpenWrt for new hardware - by lonnie - 01-10-2020, 04:48 AM
RE: OpenWrt for new hardware - by TalStar - 01-22-2020, 08:27 PM
RE: OpenWrt for new hardware - by TalStar - 01-28-2020, 07:55 PM
RE: OpenWrt for new hardware - by lonnie - 02-02-2020, 04:33 PM
RE: OpenWrt for new hardware - by TalStar - 02-04-2020, 07:05 PM
RE: OpenWrt for new hardware - by lonnie - 02-07-2020, 03:23 PM
RE: OpenWrt for new hardware - by go.fast - 02-07-2020, 09:30 PM
RE: OpenWrt for new hardware - by lonnie - 02-08-2020, 06:11 PM
RE: OpenWrt for new hardware - by go.fast - 02-09-2020, 01:39 AM
RE: OpenWrt for new hardware - by TalStar - 02-15-2020, 04:54 PM
RE: OpenWrt for new hardware - by lonnie - 02-16-2020, 11:29 PM
RE: OpenWrt for new hardware - by lonnie - 02-17-2020, 06:06 AM
RE: OpenWrt for new hardware - by go.fast - 02-18-2020, 04:58 AM
RE: OpenWrt for new hardware - by lonnie - 02-18-2020, 03:44 PM
RE: OpenWrt for new hardware - by TalStar - 02-19-2020, 12:12 AM
RE: OpenWrt for new hardware - by lonnie - 02-19-2020, 06:13 PM
RE: OpenWrt for new hardware - by TalStar - 02-19-2020, 11:18 PM
RE: OpenWrt for new hardware - by lonnie - 02-20-2020, 04:42 PM
RE: OpenWrt for new hardware - by TalStar - 02-25-2020, 06:13 PM
RE: OpenWrt for new hardware - by lonnie - 02-26-2020, 04:17 PM
RE: OpenWrt for new hardware - by TalStar - 02-26-2020, 09:50 PM
RE: OpenWrt for new hardware - by lonnie - 02-27-2020, 02:25 AM
RE: OpenWrt for new hardware - by lonnie - 02-27-2020, 07:55 PM
RE: OpenWrt for new hardware - by lonnie - 03-04-2020, 04:14 PM
RE: OpenWrt for new hardware - by TalStar - 03-04-2020, 09:39 PM
RE: OpenWrt for new hardware - by lonnie - 03-05-2020, 03:11 PM
RE: OpenWrt for new hardware - by lonnie - 03-05-2020, 04:19 PM
RE: OpenWrt for new hardware - by TalStar - 03-05-2020, 09:08 PM
RE: OpenWrt for new hardware - by lonnie - 03-06-2020, 04:00 PM
RE: OpenWrt for new hardware - by lonnie - 03-09-2020, 10:31 PM
RE: OpenWrt for new hardware - by TalStar - 05-06-2020, 05:13 PM
RE: OpenWrt for new hardware - by lonnie - 05-07-2020, 04:11 PM
RE: OpenWrt for new hardware - by lonnie - 05-08-2020, 12:07 PM
RE: OpenWrt for new hardware - by lonnie - 05-09-2020, 06:36 PM
RE: OpenWrt for new hardware - by lonnie - 05-12-2020, 01:49 AM
RE: OpenWrt for new hardware - by TalStar - 05-19-2020, 04:29 AM
RE: OpenWrt for new hardware - by lonnie - 05-19-2020, 02:39 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)