Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
OpenWrt for new hardware
#5
That hardware has a special way to recover, but it requires access in-house.

Right after power on, push and hold the reset button between the Ethernet ports. All of the lights will soon blink. Hold the button until you see them blink three times. A ping to 192.168.1.1 will begin to succeed. stop pushing the button after the 3rd blink.

Point your browser to 192.168.1.1 and you will see a screen allowing you to find a file (starburstm1205n-1.0-1.0-ar71xx-generic-cf-e320n-v2-squashfs-sysupgrade.bin) and then upload it and finally after it has checked, write it out.

Your ping should stop soon after indicating it is rebooting. Pings should start very shortly to 192.168.1.1 and then you can browse to it and commence configuration.

I have had trouble with the download site and the MyWisp password organizer. It was adding an extra byte, and that might be enough to ruin the file for upgrade purposes. For sure my mod detection in MyWisp refuses to run.

Let me know and I will put up a standard ftp site.
Reply


Messages In This Thread
OpenWrt for new hardware - by lonnie - 01-06-2020, 04:39 PM
RE: OpenWrt for new hardware - by lonnie - 01-10-2020, 04:48 AM
RE: OpenWrt for new hardware - by TalStar - 01-22-2020, 08:27 PM
RE: OpenWrt for new hardware - by TalStar - 01-28-2020, 07:55 PM
RE: OpenWrt for new hardware - by lonnie - 02-02-2020, 04:33 PM
RE: OpenWrt for new hardware - by TalStar - 02-04-2020, 07:05 PM
RE: OpenWrt for new hardware - by lonnie - 02-07-2020, 03:23 PM
RE: OpenWrt for new hardware - by go.fast - 02-07-2020, 09:30 PM
RE: OpenWrt for new hardware - by lonnie - 02-08-2020, 06:11 PM
RE: OpenWrt for new hardware - by go.fast - 02-09-2020, 01:39 AM
RE: OpenWrt for new hardware - by TalStar - 02-15-2020, 04:54 PM
RE: OpenWrt for new hardware - by lonnie - 02-16-2020, 11:29 PM
RE: OpenWrt for new hardware - by lonnie - 02-17-2020, 06:06 AM
RE: OpenWrt for new hardware - by go.fast - 02-18-2020, 04:58 AM
RE: OpenWrt for new hardware - by lonnie - 02-18-2020, 03:44 PM
RE: OpenWrt for new hardware - by TalStar - 02-19-2020, 12:12 AM
RE: OpenWrt for new hardware - by lonnie - 02-19-2020, 06:13 PM
RE: OpenWrt for new hardware - by TalStar - 02-19-2020, 11:18 PM
RE: OpenWrt for new hardware - by lonnie - 02-20-2020, 04:42 PM
RE: OpenWrt for new hardware - by TalStar - 02-25-2020, 06:13 PM
RE: OpenWrt for new hardware - by lonnie - 02-26-2020, 04:17 PM
RE: OpenWrt for new hardware - by TalStar - 02-26-2020, 09:50 PM
RE: OpenWrt for new hardware - by lonnie - 02-27-2020, 02:25 AM
RE: OpenWrt for new hardware - by lonnie - 02-27-2020, 07:55 PM
RE: OpenWrt for new hardware - by lonnie - 03-04-2020, 04:14 PM
RE: OpenWrt for new hardware - by TalStar - 03-04-2020, 09:39 PM
RE: OpenWrt for new hardware - by lonnie - 03-05-2020, 03:11 PM
RE: OpenWrt for new hardware - by lonnie - 03-05-2020, 04:19 PM
RE: OpenWrt for new hardware - by TalStar - 03-05-2020, 09:08 PM
RE: OpenWrt for new hardware - by lonnie - 03-06-2020, 04:00 PM
RE: OpenWrt for new hardware - by lonnie - 03-09-2020, 10:31 PM
RE: OpenWrt for new hardware - by TalStar - 05-06-2020, 05:13 PM
RE: OpenWrt for new hardware - by lonnie - 05-07-2020, 04:11 PM
RE: OpenWrt for new hardware - by lonnie - 05-08-2020, 12:07 PM
RE: OpenWrt for new hardware - by lonnie - 05-09-2020, 06:36 PM
RE: OpenWrt for new hardware - by lonnie - 05-12-2020, 01:49 AM
RE: OpenWrt for new hardware - by TalStar - 05-19-2020, 04:29 AM
RE: OpenWrt for new hardware - by lonnie - 05-19-2020, 02:39 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)