Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
OpenWrt for new hardware
#1
Late, very late, last night I was able to modify OpenWrt and perfectly track a StarOS ## on 5 GHz, from 4.9 to the top.  It is all manual to set it, so now I have to automate that.  But it works.

I had to abandon the idea of porting StarOS to the new hardware.  I have OpenWrt going very nicely on the hardware and all I was lacking was the licensed channels.

I will not even try for the 5 & 10 MHz channels.  My testing shows it is all about air time.  So if you use a standard 20 MHz channel and set a throughput limit, it frees up all of the air time for other units on or near the same channel.

What this also means is that as new hardware becomes available it will be much easier to support.

I expect to have this all tidied up in a couple of weeks.  I know this has been said before, but it was always at the start of the project, never this close to the end, an it is working.  I have spent hundreds, maybe thousands, of hours to get this.  I'm maybe too stubborn, but I don't quit.
Reply


Messages In This Thread
OpenWrt for new hardware - by lonnie - 01-06-2020, 04:39 PM
RE: OpenWrt for new hardware - by lonnie - 01-10-2020, 04:48 AM
RE: OpenWrt for new hardware - by TalStar - 01-22-2020, 08:27 PM
RE: OpenWrt for new hardware - by TalStar - 01-28-2020, 07:55 PM
RE: OpenWrt for new hardware - by lonnie - 02-02-2020, 04:33 PM
RE: OpenWrt for new hardware - by TalStar - 02-04-2020, 07:05 PM
RE: OpenWrt for new hardware - by lonnie - 02-07-2020, 03:23 PM
RE: OpenWrt for new hardware - by go.fast - 02-07-2020, 09:30 PM
RE: OpenWrt for new hardware - by lonnie - 02-08-2020, 06:11 PM
RE: OpenWrt for new hardware - by go.fast - 02-09-2020, 01:39 AM
RE: OpenWrt for new hardware - by TalStar - 02-15-2020, 04:54 PM
RE: OpenWrt for new hardware - by lonnie - 02-16-2020, 11:29 PM
RE: OpenWrt for new hardware - by lonnie - 02-17-2020, 06:06 AM
RE: OpenWrt for new hardware - by go.fast - 02-18-2020, 04:58 AM
RE: OpenWrt for new hardware - by lonnie - 02-18-2020, 03:44 PM
RE: OpenWrt for new hardware - by TalStar - 02-19-2020, 12:12 AM
RE: OpenWrt for new hardware - by lonnie - 02-19-2020, 06:13 PM
RE: OpenWrt for new hardware - by TalStar - 02-19-2020, 11:18 PM
RE: OpenWrt for new hardware - by lonnie - 02-20-2020, 04:42 PM
RE: OpenWrt for new hardware - by TalStar - 02-25-2020, 06:13 PM
RE: OpenWrt for new hardware - by lonnie - 02-26-2020, 04:17 PM
RE: OpenWrt for new hardware - by TalStar - 02-26-2020, 09:50 PM
RE: OpenWrt for new hardware - by lonnie - 02-27-2020, 02:25 AM
RE: OpenWrt for new hardware - by lonnie - 02-27-2020, 07:55 PM
RE: OpenWrt for new hardware - by lonnie - 03-04-2020, 04:14 PM
RE: OpenWrt for new hardware - by TalStar - 03-04-2020, 09:39 PM
RE: OpenWrt for new hardware - by lonnie - 03-05-2020, 03:11 PM
RE: OpenWrt for new hardware - by lonnie - 03-05-2020, 04:19 PM
RE: OpenWrt for new hardware - by TalStar - 03-05-2020, 09:08 PM
RE: OpenWrt for new hardware - by lonnie - 03-06-2020, 04:00 PM
RE: OpenWrt for new hardware - by lonnie - 03-09-2020, 10:31 PM
RE: OpenWrt for new hardware - by TalStar - 05-06-2020, 05:13 PM
RE: OpenWrt for new hardware - by lonnie - 05-07-2020, 04:11 PM
RE: OpenWrt for new hardware - by lonnie - 05-08-2020, 12:07 PM
RE: OpenWrt for new hardware - by lonnie - 05-09-2020, 06:36 PM
RE: OpenWrt for new hardware - by lonnie - 05-12-2020, 01:49 AM
RE: OpenWrt for new hardware - by TalStar - 05-19-2020, 04:29 AM
RE: OpenWrt for new hardware - by lonnie - 05-19-2020, 02:39 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)