View Full Version : Lucaya CPE with integrated antenna
SpecialK
10-15-2007, 02:06 PM
Hello All,
Has anyone heard when the new CPE will be shipping?
Specifically the 208, 214, 219, and 523.
I've ordered a few 208s to test but I'm still waiting on them to show up.
see below...
Patience guys. We moved warehouses and sort of got buried in orders during the move and with the sale. Remember we were back ordering through the last 2 weeks of September because the goods were in transit from the Valemount warehouse to the Minnesota warehouse. An order placed on October 1 was behind an order placed on September 15.
For any further info please PM me.
pwmaclean
10-26-2007, 02:24 PM
What are you guys thinking about using for mounting arms for the M1208 2.4 integrated? They look really small, I don't want to use a $20 steel mounting arm for such a little device. Any suggestions?
gunther_01
10-26-2007, 09:19 PM
I have not used the new CPE yet, but if it is that small and light PAC wireless has these $6 simple stamped steel arms for mounting. I tried to use them on a full size CPE but they couldn't handle it IMO. But I bet something this small would work well for them
pwmaclean
10-29-2007, 07:39 AM
gunther, I couldn't find them on the site, do you have a model #?
tks
valenti
10-29-2007, 10:33 AM
http://www.pacwireless.com/products/WMB.shtml
http://www.wlanparts.com/product/WMB/WMB_Antenna_Wall_Mount_Bracket.html
valenti
10-29-2007, 02:04 PM
What type of connector do I use for an external antenna on the M1208? The tech sheet says SMA, but it looks like an RP-SMA to me. At least, the RP-SMA cables I have from my Trango gear seem to work.
I was thinking of using these RP-SMA to N converters, then connecting a PacWireless VAGI to that. (hoping the cable will fit thru the M1208 access hole without drilling) Anybody see problems doing this?
http://www.wlanparts.com/product/AD-NF-RPSMAM/RPSMA_Male_to_N_Female_Adapter.html
Also, is the little hole next to the antenna connector for hitting the reset switch (w/paper clip)?
rbolduc
10-29-2007, 02:32 PM
What type of connector do I use for an external antenna on the M1208? The tech sheet says SMA, but it looks like an RP-SMA to me. At least, the RP-SMA cables I have from my Trango gear seem to work.
I was thinking of using these RP-SMA to N converters, then connecting a PacWireless VAGI to that. (hoping the cable will fit thru the M1208 access hole without drilling) Anybody see problems doing this?
http://www.wlanparts.com/product/AD-NF-RPSMAM/RPSMA_Male_to_N_Female_Adapter.html
Also, is the little hole next to the antenna connector for hitting the reset switch (w/paper clip)?
I don't know if there is enough room for an adapter but the hole/access slot will handle a LMR240 ok.
Yes that is a reset port, I had to take one apart to see the insides ;)
Reed