Beebe
08-13-2007, 11:39 AM
Until recently I've just been using the cheap unregulated wall warts on my tower sites, plugged into a UPS. After reading this article I use only regulated 24v power supplies on the towers.
http://www.apogeekits.com/power_adapter_selection.htm
I figured the UPS would make sure I had good voltage, but on tower sites you need every level of protection you can get.
I still use the cheap unregulated supplies on the client end due to cost.
Thanks,
Roger
http://www.apogeekits.com/power_adapter_selection.htm
I figured the UPS would make sure I had good voltage, but on tower sites you need every level of protection you can get.
I still use the cheap unregulated supplies on the client end due to cost.
Thanks,
Roger