New guy to StarOS

[onyx3821]

I am mostly a Mikrotik user. Been having a LOT of trouble with SR9's
and Mikrotik, so I bought to WAR boards, and put 'em in PTP config.

I've gotten them to link up, as I can look at the AP and see the CPE end
associated.

file:///C:/Users/Rick/AppData/Local/Temp/moz-screenshot.jpgI CANNOT for the life of me figure out how to ping across the link. I see the 192.168.3.x address on each end, changed the CPE end to 192.168.3.2/24 just to see, and I can't ping either.

Anyone know both Mikrotik and StarOS that could clue me in here ? This has got to be something stupid...

BTW... this 900 mhz PTP link is 23 miles. 15dbi grid on one end, 13dbi yagi on the other.

[lonnie]

You need to have the distance set to 25 miles for that shot.

[onyx3821]

OK thanks for that Lonnie - do I have to do it on BOTH ends ? I did it
on the AP end already, and I've gotten ONE ping through.

You need to have the distance set to 25 miles for that shot.

[tony]

Yes, both ends have to be set.

[onyx3821]

Yes, both ends have to be set.


OK thanks for this - I set both ends to 25 miles, and now have a pretty stable link.

How do I setup dhcp on the client end so they can now get online ? How do I get traffic to route across ? I can't even (seem to) ping from one side to the other.

I have 192.168.3.1/24 on my side, 192.168.3.2/24 on the other... system console doesn't let me ping the other end, and I have a "stable" link at -81 signal.

[pwmaclean]

You're gonna wanna do some more reading...check out the documentation section on the file server http://files.star-os.com/