View Full Version : War1 Maximum dc power?
Premier
06-27-2007, 12:44 PM
I have a load of 48v poe units which I used to use for the "paperweight" radios. I am now only using war1's. I seen on the description of these war1's they take from 20v-48v. I just want to be sure this is ok before I use these 48v units on my war1's? They wont do any harm?
lonnie
06-27-2007, 12:56 PM
The 48V units should be fine. Make sure the end has a 2.1 mm plug with center positive. Measure the DC Output with a voltmeter and post it here and I will advise if I think it is safe.
Premier
06-27-2007, 02:32 PM
47.7v :) The type poe unit I have does not have a dc jack, but rather 2 rj45 sockets.
lonnie
06-27-2007, 03:40 PM
That is not a problem and will work very well. It should be capable of 0.3A to have a healthy safety margin.
Coolfin07
07-25-2007, 09:32 AM
Hi,
Is is accurate to say that the WAR1 will not function on 18V regardless of the ampage?
Thanks,
CF
The WAR-1 should function fine at 18V (with a non high-power card).
Coolfin07
07-25-2007, 10:09 AM
Many thanks for that Tony.....