georgew
08-04-2006, 03:23 PM
I am trying to get OSPF working. I have a very basic config,
and I'm seeing the local router send a megabit of ICMP traffic from the OSPF interface address on the ospf network subnet toward "0.0.0.0".
On a router with three subnets with routers on them, it is spewing in all three directions, and the remote routers are spewing back.
Running 2.10.0 build 4693...
here is a representative config:
Current configuration:
!
hostname ospfd
password 1234
!
!
!
interface beacon
!
interface cbq
!
interface ecb
!
interface eth0
!
interface eth1
!
interface eth2
!
interface eth3
!
interface eth4
!
interface gre0
!
interface ipacct
!
interface lo
!
interface tunl0
!
interface wlanbr
!
router ospf
ospf router-id 172.31.15.1
redistribute connected
redistribute static
network 172.30.3.0/24 area 0.0.0.0
network 172.31.100.0/24 area 0.0.0.0
!
access-list vtylist permit 127.0.0.1/32
access-list vtylist deny any
!
line vty
access-class vtylist
!
end
and I'm seeing the local router send a megabit of ICMP traffic from the OSPF interface address on the ospf network subnet toward "0.0.0.0".
On a router with three subnets with routers on them, it is spewing in all three directions, and the remote routers are spewing back.
Running 2.10.0 build 4693...
here is a representative config:
Current configuration:
!
hostname ospfd
password 1234
!
!
!
interface beacon
!
interface cbq
!
interface ecb
!
interface eth0
!
interface eth1
!
interface eth2
!
interface eth3
!
interface eth4
!
interface gre0
!
interface ipacct
!
interface lo
!
interface tunl0
!
interface wlanbr
!
router ospf
ospf router-id 172.31.15.1
redistribute connected
redistribute static
network 172.30.3.0/24 area 0.0.0.0
network 172.31.100.0/24 area 0.0.0.0
!
access-list vtylist permit 127.0.0.1/32
access-list vtylist deny any
!
line vty
access-class vtylist
!
end