Long distance link

[Anonymous]

Your speed claims of 2.6 Mbps... Is that raw rate, or actually data throughput, measured using ftp or some other protocol?

[tony]

Your speed claims of 2.6 Mbps... Is that raw rate, or actually data throughput, measured using ftp or some other protocol?

This is raw speed mesured at the client end. (~300 - 340KBytes/sec)

[Steve]

Lonnie / Tony,

Could you give the details on the equipment you are using on both ends of that link (amps, antennas, radio/sbc...).

Thanks,

Steve
Northcc.net

[tony]

Lonnie / Tony,

Could you give the details on the equipment you are using on both ends of that link (amps, antennas, radio/sbc...).

Thanks,

Steve
Northcc.net

Both the AP and Client hardware use the TT CPE (original version), and our latest StarOS release, plus two Avaya radio cards.

I'm not quite sure no the Amp / Antenna combo. Will have to get Lonnie to fill that in.

Thanks

[lonnie]

Avaya Silver card, RF Linx 500 mW amp, 24 dB grid antenna

We have the repeater at 5100 ft. ASL to the farthest receiver 32 miles at 2400 ft ASL. There is perfect LOS.

Quality 37 Signal -52 dB -89 dB Noise at AP end