- Beacon Real Time Traffic Monitor tx,rx rates
- v3 update
- v3 as a low cost upgrade
- Cloaking in v3
- Support for Ham's
- Ipv6
- Serial remote access
- StarOS v3 x86 time frame
- Cloaking on x86
- v3/WAR Release
- Multiple Gateways in v3
- Vote Vote Vote please
- v3 on final testing
- VX and V3 WEP
- v3 release initial results
- Mesh in V3
- V3 with ubiquiti ?
- 130 km link.!
- V3 and WAR issues
- V3 Signal Question
- monitoring in V3
- v3 Mesh and cloaking?
- Number of VDS Tunnels
- v3 nat
- Cost
- Roadmap
- Compatiblity for CB3 cpe and StarOs V3 AP
- having a link problem
- V3 and snmp?
- Quad WAR Crashes on Save (Beta-14)
- Reset to Factory Defaults.
- Starutil download config
- scrambled putty screen
- VX upgrade to V3 Build 15
- Some OLSR questions.
- Acl
- DHCP server (DHCP auto-auth) limitation
- Behavior of H entry in association list
- Source routing in V3
- Documentation for installing Star V3
- Broken NAT with bridge mode
- Understanding Cloaking
- Transmit Rate
- V3 nightmare
- SSH Client for Mac X
- Hotspots in WAR Boards
- SecureCRT and V3 - Mouse does not work
- V3 Screen Colors
- InterBSS Relay
- Browser compatibility, what do you use?
- 3.65 and FCC
- V3, Firewall, and Connection Tracking
- Firmware updates
- Vds
- Major Problems in Upgrade
- OLSR dhcpd caveat [Off-topic]
- OLSR dhcpd caveat
- SuperG differences from V2 to V3
- DHCP Client
- RTS/CTS and/or FRAG
- zebra or quagga?
- V3 for WRAP? plus L7 function?
- A few issues in V3
- 'N' associations
- Upgrade from WRAP v2 to WAR v3
- Redundant / full duplex?
- v2/x86 --> v3/x86 question
- Downgrade firmware? Can you go back?
- Client radios for cloaking ???
- Legacy 802.11b channels with "cloaking channels" ???
- Cloaking ... is a modified modulation method !
- When will be available V3 for x86 and Wrap?
- Mutiple SSID's in V3
- Flash upgrade problem
- V2: Server Edition x V3: WRAP Edition ....
- Create seperate log for Associations
- Happy V3 uptime report
- Reboot and lockup issue
- WRAP V2 vs V3
- The last v3 feature I need: WMM/WME QoS
- 128 Bit Wep Generator ?
- StarV3 possible problem
- Licencing wrap with v3 problem
- WAR 2 as AP will not use NTP server.
- Upgrade Successes
- V3 for x86PC nearly ready
- Upgrading bridged wraps remotely... how?
- X86-PC supported hardware
- Laptop - Accessing a cloaked ap?
- Pooling protocol
- X86-PC ethernet ordering
- "Outdoor Only"
- StarV3-X86-PC Upgrade problem
- X86-PC supported motherboards
- WAR is dead :( :)
- OLSR and Multiple IP's On One Interface
- Understanding of Link Distance
- Any news RE:SNMP support
- Hidden Node in V3
- How to connect WDS ??
- V3 Atheros card support
- Signal and noise changes whith country
- Quality of Service supported
- V3 STP problem
- staros v3 - pps
- Upgrade to WAR 533 Failed
- OLSR Dynamic Internet Gateway Plugin
- Policy Routing
- Wow
- USB POE Ethernet Adapter
- Channel problems in V3
- 35 Mile 5.8GHz Link
- Next V3 Crossover release
- Load Balancing V3
- Factory Default
- AP Replacement - suggestions?
- V3 on WAR
- What gives?
- Trying to load V3 on a WRAP
- Booting to V3 problem
- PPS - Next approach :)
- Association list shows wierd IP
- No WDS without traffic
- Client stats on link page
- v3 WRAP no NAT :(
- pci_set_power_state
- V3 connection tracking
- Cloaking affect on others
- pps/fuzzy and l7 shaping on v3 PC
- v3 config backup
- V3 Ramblings and Wish List
- IE country code
- Will V3/V2 + VDS support broadcasting routing tables?
- V2 to V3 ssh problem
- Lightning Arrestor?
- ACL limts?
- New AP Setup ?
- V3 vs the others
- Is BGP gonna happen?
- error when upgrading from V2
- Official WRAP V2 to V3 Upgrade guide
- V2 vs V3 performance on WRAP
- Activate script changes on 1.1.4 on WAR
- What is the current proper option
- V2 as Client to V3
- Upgrading Questions
- The StarV3 supports 5 (five) PCI cards?
- Mixing V2, and V3 on Point to Point link...
- V3 check HD?
- CM9 x Orinoco
- SecureCRT and StarOS V3
- Spanning Tree causes slowdown and lockups
- Discovery Tool
- Star V3 to V2 issues or?
- Explaination of V3 Numbers
- Xr
- Bridging bug
- New V3 AP and having problem with CBQ
- Dwl-ag530 A5
- Best atheros card
- v2 to v3 licence problem
- User authentication in v3
- VDS traffic
- BootRequest BootReply
- Question on Realtime Beacon
- Another Beacon question
- System reports (version 1.1.4)
- Firewall
- detailed statistics- Total traffic flow
- 3Com OfficeConnect Wireless 11a/b/g PC Card, 3CRWE154A72 Chipset: AR5212
- seriously irritating problem
- WAR 533 W/ SENAO nmp-8602+ dropping connection
- Dropbear error
- Is G mode fixed?
- Monitoring client signals in v3: How are you doing it?
- DHCP Client Renew on Activate
- AP Power Saving confusion?
- License Key
- bridge question
- How many versions back
- Mesh Network node
- VDS Issues
- VDS Scenario / Concerns about bandwidth
- SMP/Dual Core Support?
- V2 to V3 migration: My perpective.
- Dual Link
- StarOs Crossover Release 4788 Needed
- Ping Packet Size
- Connection Tracking
- V3 for VIA 1000MHz support
- 20Mbps 27 miles??
- Newer V3 Compatible Hardware?
- Certain clients take a LOOONNNGGG TIME to associate
- Need help to config V3
- Calea -
- Vlan
- pppoe max size or multiple ip blocks
- WAR2 client NIC problem
- Websites not all working right.
- V3 not recognizing all of system memory
- Signal Levels ???
- 106 Km. 5 Ghz
- V3 X86-PC ISO image file exist ?
- V3 1.1.8 DNS problem
- Connection breaking when attempting to upgrade
- Previous Releases?
- Can't quite understand this behavior - SR9
- CPU Utilization
- Found a few 1.1.10 issues
- V3 PTP Bridge
- pppd error
- Can't reboot (X86-WRAP Edition v1.1.10 (build 1734)
- Helppppppp
- V2 clients not passing data to V3 AP
- Possible Memory Leak in V3-1.1.9 with SNMP
- v3 in 11b mode
- Re-establishing SSH session
- firewall: how about iptables ?
- Is there a data logging solution for V3?
- No Super
- DNS turning itself off. Why?
- No login prompt - MAC address dependant
- Low margin behavior...
- Bridge between V3 and V2
- V3 MTU Size.
- Upgrading from V2 to V3
- Encryption
- Can not ping WAR boards
- Extremely high latency to V3 routed network
- Hardware Watchdog?
- V3 CPE causing V2 AP to reset card
- Only some NAT rules applying, rest being ignored
- Unexplained lockup. Interference?
- RIP problems
- VDS / vtund Denying connection
- V3 CF install problem
- My Wrap, V3 and Prism Experience, whats yours?
- War and Prism advice
- Cheap workaround for SNMP not polling wpci cards
- No wirelesscards being recognized
- The connection to the server was reset while the page was loading.
- Some issues with PPpoe / Mtu?
- DHCP Quits Working
- SSH attack and high cpu
- Unstable Core Router
- Quality - Changes!!
- Firmware Upgrades
- Lite Station supported?
- File area
- WAR 2 900Mhz and OSB 900 CPE